Maintenance Guide

Keeping Your New Windows, Doors, and Siding Looking Great!

Congratulations on your beautiful new windows and siding! These upgrades not only enhance your home’s curb appeal and energy efficiency, but also add significant value to your property. To ensure they continue to perform optimally for years to come, proper care and maintenance are essential. Window Place Plus is here to help! Here’s a guide on maintaining your new windows and siding:

Window Care

Cleaning Process

  • Choose the Right Day: Unlike warmer months, the Northeast can still experience bursts of strong sunshine in the fall. Direct sunlight can cause cleaning solution to dry too quickly, leaving streaks. Opt for a cloudy day or choose a time when the windows are shaded. Note also that extreme cold can make window cleaning less pleasant and potentially damage the glass. Aim for a mild fall day with comfortable temperatures.
  • Prep Work: Start by removing any loose dirt, cobwebs, or dust from the window frame and tracks with a soft brush or a vacuum cleaner attachment. This helps prevent scratching the glass surface during cleaning.
  • Cleaning the Glass: Mix a few drops of mild dish soap with a bucket of cool or lukewarm water. Avoid harsh chemicals or abrasive cleaners that can damage the glass. Use a clean microfiber cloth for optimal results. Microfiber cloths are lint-free and absorb well, leaving your windows streak-free. Dip the microfiber cloth into the soapy solution, wring it out thoroughly to avoid dripping, and wipe the entire glass surface in a circular motion. Once you’ve wiped the entire glass surface, flip the microfiber cloth to a clean side and repeat the process. This ensures you remove any remaining soap residue that might leave streaks.
      • Squeegee (Optional): If using a squeegee, start at the top corner of the window and pull the squeegee downwards in smooth, even strokes, applying light pressure. Overlap each stroke slightly and wipe the squeegee blade with a clean, dry microfiber cloth after each pass.
  • Flip and Repeat: Flip the microfiber cloth to a clean side and repeat, wiping the entire glass surface again to remove any remaining soap residue.
  • Buff and Shine: Buff the entire glass surface with a dry microfiber cloth to ensure a sparkling clean finish. This final step removes any water spots or leftover residue, leaving your windows crystal clear.

More Tips

R

Cleaning

The frequency of cleaning will depend on your environment. Generally, cleaning your windows twice a year is recommended (more often if you live near a busy road or in a dusty area).

R

Window Tracks and Frames

Vacuum or wipe down window tracks and frames regularly to remove dust, dirt, and cobwebs. This will ensure smooth operation and prevent debris buildup that could hinder functionality.

R

Lubrication

For certain window types, lubrication of moving parts might be necessary. Consult your window care manual or reach out to Window Place Plus for specific recommendations on lubricants and lubrication frequency.

R

Seasonal Checks

For certain window types, lubrication of moving parts might be necessary. Consult your window care manual or reach out to Window Place Plus for specific recommendations on lubricants and lubrication frequency.

Specific Care by Material

Vinyl Windows

R

Cleaning

Vinyl windows are generally low-maintenance. The recommended cleaning solution is all you need. Wipe the frame and glass surfaces with a damp microfiber cloth, then dry thoroughly with another dry microfiber cloth.

Q

Avoid

Don’t use any harsh chemicals or abrasive cleaners, as they can scratch the vinyl surface. Avoid using colored cleaning solutions, as the dye can transfer to the vinyl.

Fiberglass Windows

R

Cleaning

Most fiberglass windows are similar to vinyl in terms of maintenance. The recommended cleaning solution is sufficient. Wipe the frame and glass surfaces with a damp microfiber cloth, then dry thoroughly with another dry microfiber cloth.

Q

Avoid

Don’t use abrasive cleaning pads or scouring powders, as they can scratch the fiberglass surface. Avoid using strong solvents or chemicals, as they can damage the fiberglass.

Wood Windows

R

Cleaning

Wood windows require a bit more care. Use a solution of equal parts white vinegar
and water for the glass cleaning. For the wood frames, use a wood cleaner specifically designed
for windows. Follow the manufacturer’s instructions for the wood cleaner.

R

Finishing

Wood windows require a bit more care. Use a solution of equal parts white vinegar
and water for the glass cleaning. For the wood frames, use a wood cleaner specifically designed
for windows. Follow the manufacturer’s instructions for the wood cleaner.

Q

Avoid

Don’t use any harsh chemicals or abrasive cleaners, as they can scratch the vinyl
surface. Avoid using colored cleaning solutions, as the dye can transfer to the vinyl.

Composite Windows

R

Cleaning

Composite windows are a blend of materials, so the cleaning process might vary
slightly depending on the specific composite material. Consult your window care manual or
contact the manufacturer for specific cleaning recommendations. In general, a mild soap solution
and a microfiber cloth should suffice

Q

Avoid

Avoid using harsh chemicals, abrasive cleaners, or strong solvents, as they can damage
the composite material.

Siding Care

Prep Work

R

Choose the Right Day:

 Just like windows, schedule your cleaning for a cloudy day or when direct sunlight isn’t hitting the siding. This helps prevent the cleaning solution from drying too quickly, which can leave streaks/water marks.

R

Protect Your Surroundings:

Cover any landscaping or plants near your house with a tarp to protect them from cleaning solution splashes

R

Clear the Canvas:

Start by removing any loose debris on the siding surface. Use a soft brush to
gently remove cobwebs, dust, or dirt. A leaf blower can also be a handy tool for clearing away loose leaves or cobwebs clinging to corners. This step helps prevent scratching the siding during the cleaning process.

Cleaning

R

Apply Cleaning Solution:

Depending on your siding material, use the appropriate cleaning solution (refer to the specific material care recommendations below). Wet a soft-bristled brush or a sponge with the cleaning solution

R

Clean in Sections:

Work in manageable sections, starting from the bottom and working your way up. This helps prevent streaking as dirt and cleaning solution run down the siding. Don’t do too much too fast!

R

Scrub Gently:

Use gentle scrubbing motions to remove dirt and grime. Avoid applying excessive pressure, which can damage the siding surface.

R

Rinse Thoroughly

Once you’ve finished cleaning a section, thoroughly rinse the siding with a garden
hose. Ensure all soap residue is removed to prevent streaking and attract dirt buildup.

Additional Tips

R

Cleaning

Most siding materials require minimal cleaning. Once or twice a year, you can gently wash your siding with a mild soap solution and a soft-bristled brush. You will likely be fine once every 2-3 years.

R

Mold and Mildew Prevention

In areas prone to moisture buildup, keeping your siding clean and free of debris can help prevent mold and mildew growth. If you notice any mold or mildew, address it promptly with a solution of water and white vinegar.

R

Inspections

Regularly inspect your siding for signs of damage, loose panels, or warping. Early detection and repair can prevent further problems and maintain the integrity of your siding.

R

Seasonal Maintenance

During winter months, heavy snowfall or ice accumulation might put stress on your siding. Remove snow buildup carefully to avoid damage.

Specific Care by Material

Vinyl Siding

R

Cleaning

Vinyl siding is known for being low-maintenance. The recommended cleaning solution and a soft-bristled brush will usually suffice. For stubborn dirt or grime, you can add a small amount of white vinegar to the cleaning solution.

Q

Avoid

Don’t use high-pressure washers, as they can damage the vinyl. Avoid harsh chemicals, abrasive cleaners, or scouring pads, as they can scratch the surface.

Fiberglass Siding

R

Cleaning

Fiberglass siding is similar to vinyl in terms of maintenance. The recommended cleaning solution and a soft-bristled brush are sufficient. For stubborn stains, you can add a small amount of white vinegar to the cleaning solution.

Q

Avoid

Don’t use high-pressure washers, as they can damage the fiberglass. Avoid abrasive cleaning pads or scouring powders, as they can scratch the surface. Avoid strong solvents or chemicals, as they can damage the fiberglass

Wood Siding

R

Cleaning

Wood siding requires more regular maintenance. Clean your wood siding annually using a solution of equal parts white vinegar and water. For stubborn stains, a wood cleaner specifically designed for exterior use might be necessary. Follow the manufacturer’s instructions carefully.

R

Finishing

After cleaning and drying your wood siding, apply a high-quality stain or sealant designed for exterior use. This helps protect the wood from moisture damage, UV rays, and insect infestation.

Q

Avoid

Don’t use high-pressure washers, as they can damage the vinyl. Avoid harsh chemicals,
abrasive cleaners, or scouring pads, as they can scratch the surface.

Composite Siding

R

Cleaning

Composite siding is a blend of materials, so the cleaning process might vary slightly depending on the specific composite material. Consult your siding care manual or contact the manufacturer for specific cleaning recommendations. In general, a mild soap solution and a softbristled brush should suffice.

Q

Avoid

Avoid using harsh chemicals, abrasive cleaners, or strong solvents, as they can damage the composite material. Consult the manufacturer’s recommendations for specific products to
avoid.

Stone Veneer Siding

R

Cleaning

Stone veneer siding is generally low-maintenance. A solution of mild dish soap and lukewarm water is usually sufficient for cleaning. You can use a soft-bristled brush for tougherareas.

R

Special Considerations

For stubborn stains or mineral deposits, a special stone cleaner might be necessary. Consult a professional cleaning company experienced with stone veneer for recommendations on appropriate cleaning products and techniques.

Q

Avoid

Avoid harsh chemicals, abrasive cleaners, or acidic solutions, as they can damage the stone veneer. Don’t use high-pressure washers, as the strong force can dislodge mortar or damage the stone surface

Brick Siding

R

Cleaning

Brick siding is also relatively low-maintenance. You can clean it with a solution of mild dish soap and lukewarm water, using a soft-bristled brush for tougher areas.

R

Special Considerations

For stubborn stains, a diluted solution of trisodium phosphate (TSP) might be effective. However, use TSP with caution, as it can be harmful to skin and eyes. Always wear gloves and eye protection when using TSP, and follow the manufacturer’s instructions
carefully. For deep cleaning or heavily stained brick, consult a professional cleaning company
experienced with brick exteriors.

Q

Avoid

Avoid harsh chemicals, abrasive cleaners, or acidic solutions, as they can damage the brick. Don’t use high-pressure washers, as the strong force can damage the mortar joints or even the brick itself.

Door Care

Your doors are the guardians of your home, providing security and a grand first impression. Proper care ensures they function smoothly and remain beautiful for years to come. Here’s a helpful guide from Window Place Plus on caring for your doors, whether they’re made of wood, fiberglass, or steel.

General Cleaning Tips

  • Frequency: Clean your doors at least once a year, or more often if exposed to harsh weather conditions or heavy traffic.
  • Cleaning Solution: For most doors, a simple solution of mild dish soap mixed with lukewarm water is sufficient. Avoid harsh chemicals, abrasive cleaners, or scouring pads, which can damage the surface.
  • Cleaning Tools: Use a soft sponge or microfiber cloth for cleaning.

Door-Specific Care

Wood Doors

R

Cleaning

Wipe down the wood door with the soapy solution, then dry thoroughly with a soft cloth.

R

Finishing

Wood doors benefit from periodic refinishing to maintain their beauty and protect them from the elements. The refinishing frequency depends on the door’s location and exposure to sunlight. Consult
a professional for recommendations on refinishing products and techniques specific to your wood door.

Q

Avoid

Don’t use excessive water on wood doors, as this can warp the wood. Avoid harsh chemicals or ammonia-based cleaners, which can damage the finish.

Fiberglass Doors

R

Cleaning

Fiberglass doors are generally low-maintenance. The soapy solution is all you need for cleaning.

Q

Avoid

Don’t use abrasive cleaners or scouring pads, as they can scratch the surface. Avoid strong solvents or chemicals, which can damage the fiberglass.

Steel Doors

R

Cleaning

Steel doors are easy to clean. The soapy solution is your go-to

R

Rust Prevention

For steel doors exposed to harsh weather conditions, apply a coat of rust-oleum after
cleaning and drying thoroughly

Additional Tips

  • Door Sweep Maintenance: The door sweep at the bottom of the door helps seal out drafts and debris. Inspect the door sweep regularly for signs of wear or damage. Replace it if worn or cracked to maintain optimal performance.
  • Hardware Lubrication: Lubricate door hinges with a silicone-based lubricant once a year to ensure smooth operation and prevent squeaking.
  • Weatherstripping Inspection: Weatherstripping around the door frame helps seal out drafts and moisture. Inspect it regularly for signs of wear or damage. Replace weatherstripping if necessary to maintain energy efficiency and prevent drafts.

Window Place Plus is Here to Help!

For any questions or concerns regarding the care and maintenance of your new windows and siding, don’t
hesitate to contact Window Place Plus. Our knowledgeable team is always happy to assist you in ensuring
your windows and siding continue to perform flawlessly for many years to come.