Table of Contents
Selecting energy-efficient windows and doors for your home is a critical decision that impacts comfort, aesthetics, and long-term energy costs. At Window Place Plus, we’re committed to providing you with comprehensive information to make an informed choice. This in-depth guide explores the key product criteria for ENERGY STAR certified residential windows and doors, focusing on essential performance metrics that determine their efficiency and quality.
UNDERSTANDING ENERGY STAR PERFORMANCE METRICS
Before we delve into specific criteria, it’s crucial to understand the key performance indicators that determine window and door efficiency:
U-Factor: Measures the rate of heat transfer and indicates how well the window or door insulates. Lower U-factors (typically ranging from 0.20 to 0.30 in high-performing products) indicate better insulation.
Solar Heat Gain Coefficient (SHGC): Indicates how well a window or door blocks heat from sunlight. SHGC is expressed as a number between 0 and 1, with lower numbers indicating less solar heat transmission.
Air Leakage (AL): Quantifies the amount of air that can pass through the window or door assembly. Measured in cubic feet per minute per square foot of window area, with lower numbers indicating less air leakage.
Visible Transmittance (VT): Measures how much visible light passes through the window. VT is expressed as a number between 0 and 1, with higher numbers indicating more light transmission.
Let’s examine the ENERGY STAR criteria for windows and doors in detail, focusing on these performance metrics.
ENERGY STAR Criteria for Residential Windows
ENERGY STAR divides the United States into four climate zones, each with its own set of criteria for certified windows:

Northern Climate Zone (E.g., Colorado, Maine, Massachusetts, New Hampshire, New Jersey (northern), New York, Pennsylvania, Rhode Island)
North-Central Climate Zone (E.g., Delaware, New Jersey (southern), Kansas, Kentucky, Maryland, Missouri, Nebraska, Virginia)
South-Central Climate Zone (E.g., Arizona, Texas, Florida,
Southern Climate Zone (Florida, Hawaii)
Additional Criteria for All Climate Zones
- Air Leakage: ≤ 0.3 cfm/ft²
What Does This Mean for you?
When shopping for ENERGY STAR certified windows, you’ll find these values clearly labeled on the product. The U-factor and Solar Heat Gain Coefficient (SHGC) are the most critical numbers to look for. Remember, lower U-factor values mean better insulation, which is crucial for keeping your home warm in winter and cool in summer. For SHGC, lower values are better at blocking solar heat, which is especially important in warmer climates to reduce cooling costs.
To ensure you’re getting the right windows for your area, match the U-factor and SHGC values on the label to the requirements for your specific climate zone. Don’t forget to check the Air Leakage rating too – lower numbers mean less drafty windows, increasing your home’s comfort and energy efficiency. By choosing windows that meet or exceed these criteria, you’re investing in long-term energy savings and improved home comfort.
5 Tips for Choosing ENERGY STAR Certified Windows:
- Look for the ENERGY STAR label: This ensures the window meets the minimum energy efficiency standards for your climate zone.
- Check the NFRC label: This label provides detailed performance information. Compare these numbers to the ENERGY STAR criteria for your zone.
- Consider your home’s orientation: South-facing windows might benefit from higher SHGC in cold climates to allow for passive solar heating.
- Don’t forget about visible transmittance (VT): While not an ENERGY STAR criterion, a higher VT means more natural light, potentially reducing your lighting needs.
- Think long-term: More efficient windows might cost more upfront but can lead to significant energy savings over time. Calculate the potential return on investment.
ENERGY STAR CRITERIA FOR RESIDENTIAL DOORS
ENERGY STAR categorizes doors into three types: opaque, ≤1/2-lite, and >1/2-lite. The criteria vary based on the amount of glazing (glass) in the door:

What Does This Mean?
When selecting ENERGY STAR certified doors, you’ll notice different criteria based on the amount of glass in the door. These values will be clearly displayed on the product label. For opaque doors (no glass), focus primarily on the U-factor – the lower this number, the better the door is at insulating your home. For doors with glass, you’ll need to consider both the U-factor and the Solar Heat Gain Coefficient (SHGC), just like with windows.
Pay attention to how these values compare to the requirements for your climate zone. In colder areas, a low U-factor is crucial for keeping heat inside, while in warmer regions, a low SHGC helps keep your home cool by blocking solar heat. Also, check the Air Leakage rating – lower values mean less air infiltration, which can significantly impact your home’s energy efficiency. By choosing doors that meet these criteria, you’re ensuring that every entrance to your home contributes to energy savings and comfort.
5 Tips for Choosing ENERGY STAR Certified Doors:
- Understand your door type: Opaque, ≤1/2-lite, or >1/2-lite. This determines which criteria apply to your door.
- Pay attention to installation: Even the most efficient door won’t perform well if not properly installed. Consider professional installation for best results.
- Look beyond efficiency: While energy efficiency is crucial, also consider durability, security features, and how the door complements your home’s aesthetics.
- Check for air leakage: This is especially important for doors. Lower air leakage values mean better insulation and fewer drafts.
- Consider the frame: The door frame plays a significant role in overall efficiency. Look for frames made of materials with good insulating properties.
THE BENEFITS OF ENERGY STAR CERTIFIED WINDOWS AND DOORS
Investing in ENERGY STAR certified windows and doors offers numerous advantages:
Lower Energy Bills: These products can lower your energy bills by an average of 12% nationwide.
Enhanced Comfort: Improved insulation reduces drafts and increases overall comfort in your home.
UV Protection: Many ENERGY STAR certified windows and doors filter out harmful UV rays, protecting your furnishings from fading.
Reduced Carbon Footprint: Energy-efficient products help reduce greenhouse gas emissions, contributing to environmental conservation.
Potential Tax Credits: Some ENERGY STAR certified products may qualify for federal tax credits or local utility incentives.
Our Commitment to Energy Efficiency
At Window Place Plus, we’re dedicated to offering a wide range of ENERGY STAR certified windows and doors that meet or exceed these criteria. Our expert team is always ready to guide you through the selection process, ensuring you make the best choice for your unique needs and climate zone.
Ready to transform your home with beautiful, durable, and energy-efficient windows and doors? Contact us today for a free consultation and let’s bring your vision to life!